Belts For Turntables
You need belts for turntables that operate with belt mechanism. There are two types of turntables, belt driven turntables and direct drive turntables. The first one operates with belt. The belt is used to connect the motor to the platter. The platter is nothing but the record playing surface. In the second model, there is no belt but there is a magnetic connection between the motor and the platter. So there is no need for belt here. In the first model if the belts are worn out you need belts for turntables to replace them.
The belts for turntables are made of rubber and different manufacturer manufacture them in different lengths and widths. If your turntable is belt driven you need to know basic details of the belts for turntables. The belt driven ones are quite inexpensive than the direct drive version and so they are preferred by the beginners. The reason why they are cheap is because they allow the usage of cheaper motor.
Some love belt driven models and some love direct drive versions. You can easily say that there are both advantages and disadvantages of using each type of them. The belt driven models operate more quietly and its motor driven counterpart and so could offer superior listening experience to the audience. But the most important shortcoming of this model is that they will eventually fail and have to be replaced at particular time period. The belts for turntables would become brittle and wear out after few years of use.
When the sound quality of the turntable deteriorates, you have to replace the belts for turntables. Sometimes you simply have to adjust them to improve the sound quality. You may not find belts for turntables at the local stores but you can locate them in large number in online stores. You have to buy those particular belts for turntables that you own. All belts may not be suitable for all models. So you have to make your search with make and model number.
If you have to find out correct belts for turntables, you have to follow some simple instructions. You have to take out the rubber mat off the platter and lift the platter off the turntable. You can see a clip inside and you need to disengage the clip. This is where you have to fix the belts for turntables. Then replace the platter and mat back. That’s all!
